R25 10K B25/85 3435k NTC Epoxy Thermistor For UAV
Brief Introduction:
MF5A-1( for UAV unmanned aerial vehicle)series epoxy-coated NTC Thermistor be manufactured from Hefei Jingpu Sensor Technology Co., Ltd. It’s composed of Copper clad steel lead wire, soldered NTC chip, and epoxy resin. The sensor feature: simple, functional, high accuracy. The optional resistance value range from 0.3kΩ to 2000kΩ, and the beta value range from 2500K to 4500K. These epoxy-coated NTC Thermistors be widely applied for home appliances, automotive, medical equipment, power tool, etc.
Features:
•Comply with RoHS standard
•R25=10KΩ±5%,B25/85=3435k±2%
•Operating temperature range: -40℃~125℃
•The thickness of the thin
Application:
• For UAV(unmanned aerial vehicle)
Structure and Dimensions:(unit: mm)
| 1 | Chip | NTC Chip | 1 | / |
| 2 | Encapsulation | Epoxy resin | 1 | / |
| 3 | Cable | Fe/Sn | 2 | / |
Standard packing (inner packing): 500pcs/polybag
Electrical Specification:
| Rec. at 25℃(kΩ)+A2:G25+A2:G25 | Beta value | (In air) TPmax(mW) | δ(mW/℃) | Thermal time constant τ(sec.) | Operating Temperature Range TL-TH(℃) | Total length
L(mm) |
| 1 | B25/85=3435 | Approx.60 | Max.3.0 | Max.20 | -40℃~125℃ | 8~100 |
| 1.5 | B25/50=3850 |
| 1.5 | B25/50=3935 |
| 2 | B25/85=3550 |
| 2 | B25/85=3935 |
| 2.08 | B25/85=3580 |
| 2.2 | B25/50=3935 |
| 3 | B25/50=3950 |
| 5 | B25/50=3470 |
| 5 | B25/50=3950 |
| 8 | B25/100=3988 |
| 10 | B25/85=3435 |
| 10 | B25/50=3470 |
| 10 | B25/50=3935 |
| 10 | B25/50=3950 |
| 20 | B25/50=3950 |
| 47 | B25/50=3950 |
| 50 | B25/50=3950 |
| 50 | B25/50=4200 |
| 100 | B25/50=4200 |
| 200 | B25/50=4200 |
| 500 | B25/50=4450 |
| 1000 | B25/85=4600 |
Operation Notice:
1. Application: Temperature measure and control；
2. The current flowing through the NTC is controlled within the Pmax range to avoid the measurement error caused by the self-heating of the component.
3. Avoid excessive heat shock, The hot air blow should beat at least 30mm to the probe in case a heat-shrink protection tube needs to be attached.
4. Storage Temperature -10℃～40℃,≤75%RH； Avoid a corrosive gas and sunlit environment; After opening the package, it needs to be sealed again.
5. According to the structure of the Glass coating NTC thermistor, when the end-user is installed, to avoid the epoxy head being subjected to too much tensile force and bending force from the lead wire, The lead wire shall be controlled at a bending point or a force point on a lead wire 6mm or less below the sealing head. So as not to hurt the chip, resulting in resistance drifting and even open circuit, especially when the component is heated.
You may also like:
Product Tags:
|
|
R25 10K B25/85 3435k NTC Epoxy Thermistor For UAV Images
|
